How to download nikon 810 pdf manual

The Group-area AF mode offers fast acquisition and improved background isolation when shooting subjects that are comparatively small and close to a high-contrast or distracting background.

Skip to content Home. Search for:. Nikon DA Key Features: Nikon D Key Features: Download Pdf Driver Manual Ky. While the exposure meters are on, rotate the main command dial to choose a shutter speed, and the sub-command dial to set aperture. To prevent blur, use a tripod or an optional wireless remote controller 0 or remote cord 0 Page I Button Close the viewfinder eyepiece shutter to prevent light entering via the viewfinder from appearing in the photograph or interfering with exposure 0 Nikon recommends using a fully charged battery or an optional AC adapter and power connector to prevent loss of power while the shutter is open.

Page Choose a shutter speed. Time Open the shutter. Page Shutter-Speed And Aperture Lock Shutter-Speed and Aperture Lock Shutter speed lock is available in shutter-priority auto and manual exposure modes, aperture lock in aperture-priority auto and manual exposure modes.

Shutter speed and aperture lock are not available in programmed auto exposure mode. Assign shutter speed and aperture lock to a camera control. Page Aperture exposure modes g and h : Press the selected button and rotate the sub-command dial until F icons appear in the viewfinder and the control panel.

Fn button Sub-command dial To unlock aperture, press the button and rotate the sub- command dial until the F icons disappear from the displays. Page Autoexposure Ae Lock Autoexposure AE Lock Use autoexposure lock to recompose photographs after using center-weighted metering and spot metering 0 to meter exposure.

Lock exposure. Shutter-release button Position the subject in the selected focus point and press the shutter- release button halfway. Page Metered Area In spot metering, exposure will be locked at the value metered in a 4-mm 0. In center- weighted metering, exposure will be locked at the value metered in a mm circle in the center of the viewfinder.

Adjusting Shutter Speed and Aperture While exposure lock is in effect, the following settings can be adjusted without altering the metered value for exposure Page Exposure Compensation Exposure Compensation Exposure compensation is used to alter exposure from the value suggested by the camera, making pictures brighter or darker.

It is most effective when used with center-weighted or spot metering 0 Page To choose a value for exposure E button compensation, press the E button and rotate the main command dial until the desired value is displayed in the control panel or viewfinder. Page Exposure Mode h In exposure mode h, exposure compensation affects only the exposure indicator; shutter speed and aperture do not change.

See Also For information on choosing the size of the increments available for exposure compensation, see Custom Setting b3 Exp. Choose in situations in which it is difficult to set exposure, flash level i-TTL and, where supported, auto aperture flash control modes only; see pages , , and , white balance, or Active D-Lighting and there is not time to check results and adjust settings with each shot, or to experiment with different settings for the same subject.

Page Choose the number of shots. Pressing the D button, rotate the main command dial to choose the number of shots in the bracketing sequence. The number of shots is shown in the control panel. Number of shots D button Main command Control panel dial Exposure and flash Page Select an exposure increment.

Pressing the D button, rotate the sub-command dial to choose the exposure increment. Exposure increment D button Sub-command Control panel dial At default settings, the size of the increment can be chosen from 0. Page Frame a photograph, focus, and shoot. Modifications to exposure are added to those made with exposure compensation see page While bracketing is in effect, a bracketing progress indicator will be displayed in the control panel.

The program last in effect will be restored the next time bracketing is activated. Page Exposure Bracketing The camera modifies exposure by varying shutter speed and aperture programmed auto , aperture shutter-priority auto , or shutter speed aperture-priority auto, manual exposure mode.

For more information on white balance, see page Select white balance bracketing. Choose the number of shots. Page Select a white balance increment. Pressing the D button, rotate the sub-command dial to choose the white balance adjustment.

Each increment is roughly equivalent to 5 mired. White balance increment D button Sub-command Control panel dial Choose from increments of 1 5 mired , 2 10 mired , or 3 15 mired.

Each shot will be processed to create the number of copies specified in the bracketing program, and each copy will have a different white balance. Modifications to white balance are added to the white balance adjustment made with white balance fine- tuning. For more information on Active D-Lighting, see page Select ADL bracketing. Page At settings other than zero, a d icon and an ADL bracketing indicator will appear in the control panel and D will be displayed in the viewfinder. Choose two shots to take one photograph with Active D-Lighting off and another at a selected value.

Page Active D-Lighting is shown in the control panel. The camera will vary Active D-Lighting shot-by- shot according to the bracketing program selected. A segment will disappear from the indicator after each shot. Page ADL Bracketing In continuous release modes 0 , shooting will pause after the number of shots specified in the bracketing program have been taken. Shooting will resume the next time the shutter-release button is pressed. Auto white balance is recommended with most light sources.

If the desired results can not be achieved with auto white balance, choose an option from the list below. Option Color temp. Page White balance can be selected by pressing the U button and rotating the main command dial until the desired setting is displayed in the control panel.

U button Main command Control panel dial The Shooting Menu White balance can also be adjusted using the White balance option in the shooting menu 0 , which also can be used to fine-tune white balance 0 or measure a value for preset manual white balance 0 Page Color Temperature The perceived color of a light source varies with the viewer and other conditions.

Color temperature is an objective measure of the color of a light source, defined with reference to the temperature to which an object would have to be heated to radiate light in the same wavelengths.

Page Press J. Press J to save settings and return to the shooting menu. J button Choose Color Temperature Note that the desired results will not be obtained with flash or fluorescent lighting.

Choose N Flash or I Fluorescent for these sources. Page Select a value for green-magenta. Press 4 or 2 to highlight the G green or M magenta axis and press 1 or 3 to select a value. Value for green G - magenta M axis Press J. Press J to save changes and return to the shooting menu. Press the U button and rotate the sub- command dial until the desired value is displayed in the control panel adjustments are made in mireds; Page Preset Manual Preset Manual Preset manual is used to record and recall custom white balance settings for shooting under mixed lighting or to compensate for light sources with a strong color cast.

The camera can store up to six values for preset manual white balance in presets d-1 through d Place a neutral gray or white object under the lighting that will be used in the final photograph.

In studio settings, a standard gray panel can be used as a reference object. Note that exposure is automatically increased by 1 EV when measuring white balance; Page Select a preset. Press the U button and rotate the sub-command dial until the desired white balance preset d-1 to d-6 is displayed in the control panel.

U button Sub-command Control panel dial Select direct measurement mode. Release the U button briefly and then press the button until the L icon in the control panel starts to flash. Page Measure white balance. Before the indicators stop flashing, frame the reference object so that it fills the viewfinder and press the shutter-release button all the way down.

The camera will measure a value for white balance and store it in the preset selected in Step 3. No photograph will be recorded; Page Direct Measurement Mode If no operations are performed during viewfinder photography while the displays are flashing, direct measurement mode will end in the time selected for Custom Setting c2 Standby timer, 0 Protected Presets If the current preset is protected 0 , 3 will flash in the control panel and viewfinder if you attempt to measure a new value.

Page Live View Spot White Balance Live View Spot White Balance In live view photography and movie live view 0 35, 49 , white balance can be measured in a selected area of the frame, eliminating the need to prepare a reference object or change lenses during telephoto photography. Press the a button. Press the center of the multi selector or press the shutter-release button all the way down to measure white balance.

Page Measuring Preset Manual White Balance Live View Preset manual white balance can not be measured when Record movies is selected for Custom Setting g4 Assign shutter button, 0 and the live view selector is rotated to 1. Preset manual white balance can not be set while an HDR exposure is in progress 0 or when a setting other than None is selected for photo live view display white balance monitor hue; Select Preset manual. Select White balance in the shooting menu, then highlight Preset manual and press 2.

Page Copy white balance. Press J to copy the white balance value for the highlighted photograph to the selected preset. If the highlighted photograph has a comment 0 , the comment will be copied to the comment for the selected preset. Choosing a Source Image To view the image highlighted in Step 4 full frame, press and hold the X button. Page Choosing a White Balance Preset Press 1 to highlight the current white balance preset d-1— d-6 and press 2 to select another preset.

Fine-Tuning Preset Manual White Balance The selected preset can be fine-tuned by selecting Fine-tune and adjusting white balance as described on page Option Description Standard processing for balanced results. Standard Recommended for most situations. Minimal processing for natural results. Choose Neutral for photographs that will later be processed or retouched. A list of Picture Controls will be displayed.

Highlight a Picture Control and press J button Custom Picture Controls can be saved to a memory card for sharing among other cameras of the same model and compatible software 0 Choose a balanced combination of settings using Quick adjust, or make manual adjustments to individual settings. Select a Picture Control. Highlight the desired Picture Control in the Picture Control list 0 and press 2.

Control the sharpness of outlines. Select A to adjust sharpening automatically according to the type of Sharpening scene. Use a type G, E, or D lens for best results. Switching Between Manual and Auto Press the X button to switch back and forth between manual and auto A settings for sharpening, clarity, contrast, and saturation.

Press 4 or 2 to adjust saturation in increments of 1, or rotate the sub-command dial to choose a value in increments of 0.

Select Manage Picture Control. Highlight Manage Picture Control in the shooting menu and press 2. Page Select a destination.

Choose a destination for the custom Picture Control C-1 through C-9 and press 2. Name the Picture Control. Keyboard area The text-entry dialog shown at right will be displayed. By default, new Picture Controls are named by adding a two-digit number assigned automatically to the name of the existing Picture Control; Page Save changes and exit.

Press J to save changes and exit. The new Picture Control will appear in the Picture Control list. The memory card can only be used to store user-created custom Picture Controls. The preset Picture Controls supplied with the camera 0 can not be copied to the memory card, renamed, or deleted. Use for high contrast scenes, for example when photographing brightly lit outdoor scenery through a door or window or taking pictures of shaded subjects on a sunny day.

Highlight Active D-Lighting in the shooting menu and press 2. Choose an option. Highlight the desired option and press J. If Y Auto is selected, the camera will automatically adjust Active D-Lighting according to shooting conditions in exposure mode h, however, Y Auto is equivalent to Q Normal.

HDR is most effective when used with matrix metering 0 ; with spot or center-weighted metering and a non-CPU lens, an exposure differential of Auto is equivalent to about 2 EV.

Page Select a mode. Highlight HDR mode and press 2. Highlight one of the following and press J. Page Choose the exposure differential. To choose the difference in exposure between the two shots, highlight Exposure differential and press 2. The options shown at right will be displayed. Highlight an option and press J. Choose higher values for high-contrast subjects, but note that choosing a value higher than required may not produce the desired results; The camera takes two exposures when the shutter-release button is pressed all the way down.

Choose a metering method 0 Page Choose a flash mode. Press the M Y button and rotate the main command dial until the desired flash mode icon is displayed in the control panel 0 M Y button Main command Control panel dial Check exposure shutter speed and aperture.

Press the shutter-release button halfway and check shutter speed and aperture. In programmed auto and aperture-priority auto modes, shutter speed will automatically be set to values between s when an optional Front-curtain flash unit is used with Auto FP High-Speed Sync; Page Flash mode Description In shutter-priority auto or manual exposure mode, flash fires just before the shutter closes.

Use to create effect of a stream of light behind moving objects. In programmed auto and aperture-priority auto, slow Rear-curtain rear-curtain sync is used to capture both subject and sync background.

Preflashes reflected from objects in all areas of frame are picked up by RGB sensor with approximately 91K 91, pixels and are analyzed in combination with range information from matrix metering system to adjust flash output for natural balance between main subject and Page See Also See page for information on locking flash value FV for a metered subject before recomposing a photograph.

For information on auto FP high-speed sync and choosing a flash sync speed, see Custom Setting e1 Flash sync speed, 0 For information on choosing the slowest shutter speed available when using the flash, see Custom Setting e2 Flash shutter speed, 0 Flash output can be increased to make the main subject appear brighter, or reduced to prevent unwanted highlights or reflections. Page Optional Flash Units The flash compensation selected with the optional flash unit is added to the flash compensation selected with the camera.

See Also For information on choosing the size of the increments available for flash compensation, see Custom Setting b3 Exp. Page Fv Lock FV Lock This feature is used to lock flash output, allowing photographs to be recomposed without changing the flash level and ensuring that flash output is appropriate to the subject even when the subject is not positioned in the center of the frame.

Flash output is adjusted automatically for any changes in ISO sensitivity and aperture. Page Lock flash level. After confirming that the flash ready indicator M is displayed in the viewfinder, press the button selected in Step 1. The flash will emit a monitor preflash to determine the appropriate flash level. Flash output will be locked at this level and FV lock icon e will appear in the viewfinder. Page Other Shooting Options Other Shooting Options The R Button Viewfinder Photography Pressing the R button during viewfinder photography displays shooting information in the monitor including shutter speed, aperture, number of exposures remaining, and AF-area mode.

Page Shutter-speed lock icon Page T indicator Page Active D-Lighting indicator.. Page The B Button The b button Press the b button for quick access to the following settings during viewfinder photography. Highlight items using the multi selector and press J to view options for the highlighted item. Press the b button again to resume shooting. Page Two-Button Reset: Restoring Default Settings Two-Button Reset: Restoring Default Settings The camera settings listed E button below can be restored to default values by holding the T and E buttons down together for more than two seconds these buttons are marked by a green dot.

The control panel turns off briefly T button while settings are reset. Page Multiple Exposure Multiple Exposure Follow the steps below to record a series of two to ten exposures in a single photograph.

Multiple exposures can make use of RAW data from the camera image sensor to produce colors noticeably superior to those in software-generated photographic overlays. Highlight Multiple exposure mode and press 2.

Multiple exposure shooting will continue until you select Off for Multiple exposure mode. Highlight Number of shots and press 2.

Press 1 or 3 to choose the number of exposures that will be combined to form a single photograph and press J. Page Choose the amount of gain. Highlight Auto gain and press 2. The following options will be displayed.

In continuous release modes 0 , the camera records all exposures in a single burst. If On series is selected, the camera will continue to record multiple exposures while the shutter-release button is pressed; if On single photo is selected, multiple exposure shooting will end after the first photograph.

If shooting ends before the specified number of exposures have been taken, a multiple exposure will be created from the exposures that have been recorded to that point. Page Interval Timer Photography If interval timer photography is activated before the first exposure is taken, the camera will record exposures at the selected interval until the number of exposures specified in the multiple exposure menu have been taken the number of shots listed in the interval timer shooting menu is ignored.

Page Interval Timer Photography Interval Timer Photography The camera is equipped to take photographs automatically at preset intervals. Before Shooting Select a release mode other than self-timer E when using the interval timer. Before beginning interval timer photography, take a test shot at current settings and view the results in the monitor.

Once settings have been adjusted to your satisfaction, close the viewfinder eyepiece shutter to prevent light entering via the viewfinder interfering with photographs and exposure 0 Page Adjust interval timer settings.

Choose a start option, interval, number of shots per interval, and exposure smoothing option. To start shooting immediately, select Now. To start shooting at a chosen date and time, select Choose start day and start time, then choose the date and time and press J.

In S single frame mode, the photographs for each interval will be taken at the rate chosen for Custom Setting d2 CL mode shooting speed, 0 Page Start shooting.

Highlight Start and press J. The first series of shots will be taken at the specified starting time, or after about 3 s if Now was selected for Start options in Step 2. Shooting will J button continue at the selected interval until all shots have been taken.

Page Bracketing Adjust bracketing settings before starting interval timer photography. If exposure, flash, or ADL bracketing is active while interval timer photography is in effect, the camera will take the number of shots in the bracketing program at each interval, regardless of the number of shots specified in the interval timer menu. For information on the image area used for time-lapse movies, see page Before Shooting Before beginning time-lapse photography, take a test shot at current settings framing the photo in the viewfinder for an accurate exposure Page Adjust time-lapse photography settings.

Choose an interval, total shooting time, and exposure smoothing option. Choose an interval longer than the slowest anticipated shutter speed minutes and seconds and press J. Time- lapse photography starts after about 3 s. The camera takes photographs at the selected interval for the selected shooting time. Shooting will resume with the next frame.

Page Image Review The K button can not be used to view pictures while time-lapse photography is in progress, but the current frame will be displayed for a few seconds after each shot if On is selected for Image review in the playback menu 0 By specifying lens data lens focal length and maximum aperture , the user can gain access to the following CPU lens functions.

Page The camera can store data for up to nine non-CPU lenses. Highlight Non-CPU lens data in the setup menu and press 2. Choose a lens number. Highlight Lens number and press 4 or 2 to choose a lens number. Page Focal Length Not Listed If the correct focal length is not listed, choose the closest value greater than the actual focal length of the lens.

Teleconverters and Zoom Lenses The maximum aperture for teleconverters is the combined maximum aperture of the teleconverter and the lens. Note that lens data are not adjusted when non-CPU lenses are zoomed in or out. For information on connecting the unit, see the manual provided with the device. Option Description Exposure meters will turn off automatically if no operations are performed for the period specified in Custom Setting c2 Standby timer, 0 ; The most recent photograph will be displayed in the monitor.

Additional pictures can be displayed by pressing 4 or 2; to view additional information on the current photograph, K button press 1 or 3 0 Image Review When On is selected for Image review in the playback menu 0 , photographs are automatically displayed in the monitor after shooting because the camera is already in the correct orientation, images are not rotated automatically during image review. Page Two Memory Cards If two memory cards are inserted, you can select a memory card for playback by pressing the W button when 72 thumbnails are displayed.

The dialog shown at right will be displayed; highlight the desired slot and press 2 to display a list of folders, then highlight a folder and press J to view the pictures in the selected folder.

Page Photo Information Photo Information Photo information is superimposed on images displayed in full- frame playback.

Press 1 or 3 to cycle through photo information as shown below. In all Color temperature Page Playback Zoom To zoom in on the photograph when the histogram is displayed, press X. Use the X and W buttons to zoom in and out and scroll the image with the multi selector. The histogram will be updated to show only the data for the portion of the image visible in the monitor.

Page White balance Page Name of photographer Page Description Faces up to 35 detected during zoom are indicated Select faces by white borders in navigation window. Rotate sub-command dial to view other faces. Rotate main command dial to view same View other location in other images at current zoom images ratio.

Protected files are marked with a P icon and can not be deleted using the O Q button or the Delete option in the playback menu. Page Deleting Photographs Deleting Photographs To delete the photograph displayed in full-frame playback or highlighted in the thumbnail list, press the O Q button. To delete multiple selected photographs or all photographs in the current playback folder, use the Delete option in the playback menu.

Note that depending on the number of images, some time may be required for deletion. Option Description Selected Delete selected pictures. Delete all pictures in the folder currently selected for playback 0 Page Connections Be sure to use the latest version of ViewNX 2, which is available for download from the websites listed on page xxii, as earlier versions that do not support the D may fail to transfer NEF RAW images correctly.

Launch the installer. Connect the USB cable. After turning the camera off and ensuring that a memory card is inserted, connect the supplied USB cable as shown and then turn the camera on. Windows 7 If the following dialog is displayed, select Nikon Transfer 2 as described below. A program selection dialog will be displayed; Page Windows 8. Click Start Transfer. At default settings, pictures on the memory card will be copied to the computer.

Page Consult online help for more information on using ViewNX 2. The camera connects to the UT-1 using the USB cable supplied with the camera, while the UT-1 in turn connects to the network via an Ethernet cable or an optional WT-5 wireless transmitter 0 Page During Transfer Movies can not be recorded or played back when the UT-1 is connected and there are either images remaining to be sent or images currently being transferred via an Ethernet or wireless network.

Movies Movies can be uploaded over Ethernet and wireless networks in transfer mode. Do not use force or attempt to insert the connectors at an angle. When the camera and printer are turned on, a welcome screen will be displayed in the monitor, followed by a PictBridge playback display.

Press 4 or 2 to view additional pictures. Press the X button to zoom in on the current frame press the center of the multi selector to exit zoom. To view thumbnails, press the center of the multi selector. Page Adjust printing options. Press J to display the following items, then press 1 or 3 to highlight an item and press 2 to view options only options supported by the current printer are listed; to use the default option, select Printer default. After selecting an option, press J to return to the printer settings menu.

Press the G button in the PictBridge playback display. Highlight one of the following options and press 2. Use the multi selector to highlight pictures to view images in other locations, press W and select the desired card and folder as described on page ; Page Select imprint options. Highlight the following options and press 2 to toggle the highlighted option on or off. Page Hdmi Cable Clip 0 Volume can be adjusted using television controls; the camera controls can not be used.

Do not use cable clips with non-Nikon cables. If Auto is selected, the camera will automatically select the appropriate format. Page Television Playback Use of an AC adapter and power connector available separately is recommended for extended playback. For information on two-button reset, see page Option Description Pictures in all folders created with the D will be visible ND during playback. Pictures in all folders will be visible during playback. Only pictures in the current folder will be visible during Current playback.

Page Playback Display Options Select pictures. Use the multi selector to scroll through the pictures on the memory card to view the highlighted picture full screen, press and hold the X button; to view images in other locations, press W and select the desired card and folder as described on page and press the center of the multi selector to select the current picture. This option is only available when two memory cards are inserted in the camera. Option Description Select source Choose card from which pictures will be copied.

Select image s Select pictures to be copied. Page Select the source folder. Highlight the folder containing the images to be copied and press 2. Make the initial selection.

Before going on select or deselect individual images, you can mark all or all protected images in the folder for copying by choosing Select all images or Select protected images.

Page Choose Select destination folder. We may be unable to respond to inquiries from individuals who have not purchased our products. Please note that the manual and the contact information therein are subject to change without notice. The Manual is protected by Japanese copyright law and international copyright laws and treaties.

You must reproduce on each copy the Nikon copyright notice and any other proprietary legends that were on the original. Except as otherwise stated in this Agreement, you may not make or distribute copies of the Manual to others or electronically transfer the Manual from one computer to another over a network. This Agreement is governed by and shall be construed in accordance with the laws of Japan without regard to its conflicts of laws principles.

In the event a dispute arises under or in connection with this Agreement, you hereby consent to personal jurisdiction of Japan and waive any objection that such forum is inconvenient. You further consent to service of process in any action arising from this Agreement by regular mail or other commercially reasonable means of receipted delivery.

If any provision of the Agreement shall be determined invalid for any reason, the remaining provisions shall not be invalidated and shall remain in full force and effect. This Agreement sets forth the entire agreement and understanding between you and Nikon, and supersedes and replaces any other agreements relating to the subject matter of this Agreement.

The failure of any party to insist upon strict performance of any of the terms or provisions of this Agreement, or the exercise of any option, right or remedy contained herein, shall not be construed as a waiver of any future application of such term, provision, option, right or remedy, and such term, provision, option, right or remedy shall continue and remain in full force and effect. The headings of the sections of this Agreement are inserted for convenience only and shall not constitute a part hereof or affect in any way the meaning or interpretation of this Agreement.

Except as otherwise expressly provided herein, the provisions of section 3 and section 4 together with any provisions that by their express terms apply to periods after termination of this Agreement, shall survive termination of this Agreement for any reason. Other products.